End Mill Holder WELDON

Products Menu
End Mill Holder WELDON

End Mill Holder WELDON

 

Usage:

For milling-tools with zylindrical shaft type Weldon DIN 1835 Form B. Suitable for internal coolant flow Form AD/B = either central or over collar. Coolant channels in the collar are closed by a plastic dowel which can be removed if necessary. Please don't re-use the removed plastic dowels.

Scope of delivery:

with 1 clamping screw, from Dia 25mm with 2 screws

Accuracy:

Runout 15µm max. a 3 x d. Due to the eccentric grinding of the bores, the run-out can only be checked by inserting a qualified tool blank. Do NOT measure bore ! (see technical information)

Coolant supply:

Either Form AD = Central OR Form AD/B = combined coolant version ( Please take a look at the information for each single article).

Balanced:

G6,3 12.000 rpm / fine-balancing on grade G2,5 and/or higher rotations is possible with uplift price
Display:
List
Grid
Show:
Sort By:
SK40
For milling-tools with cylindrical shaft type Weldon DIN 1835 Form B. Suitable for internal coolant flow Form AD/B = either central or over collar. Coolant channels in the collar are closed by a plastic dowel which can be removed if necessary. Please don't re-use the removed plastic dowels.   SK d1 A Form L D 40 6 50 AD 118 ..
23.80€

Availability:
Pre-Order

SK50
For milling-tools with cylindrical shaft type Weldon DIN 1835 Form B. Suitable for internal coolant flow Form AD/B = either central or over collar. Coolant channels in the collar are closed by a plastic dowel which can be removed if necessary. Please don't re-use the removed plastic dowels.   SK d1 A Form L D 50 6 63 AD 165 ..
38.68€

Availability:
Pre-Order