The 7I64 is an 24 output, 24 input isolated I/O card. The 7I64 provides 24 isolated 48VDC 2.5A output drivers. All output drivers are low saturation voltage MOSFETS for low power dissipation. Each of the 24 output switches is isolated from the others, allowing high side, low side, push-pull and other output switch configurations. A built in watchdog timer turns all outputs ..
The 7I66-24 is a 24 channel remote isolated digital output card. All output pins have LED status indicators. Outputs are sourcing type drivers capable of driving 2.5 A loads. The field output points are galvanically isolated from the communications link. The 7I66-24 uses field power of 8VDC to 32VDC. The RS-422 interface at 2.5M Baud is compatible with HostM..
The 7I66-8 is a 8 output and 16 input remote isolated digital I/O card. The 7I66-8 inputs sense positive inputs relative to a common field ground. Input impedance is 22K Ohms and inputs can range from 5VDC to 32VDC. All I/O pins have LED status indicators. Outputs are sourcing type drivers capable of driving 2.5 A loads. The field I/O points are galvanically isola..
The 7I69 is a remote digital I/O card with 48 digital I/O bits. All I/O bits are 5V TTL compatible open collector type drivers with 15 mA sink capability per I/O pin. When output pins are set high, they may be used as inputs. Each I/O pin has a 3.3K pullup for direct connection with switches, optosensors etc. I/O connectors are 50 pin headers with I/O module rack compatible..
The 7I70 is a remote isolated 48 input card. The 7I70 inputs sense positive inputs relative to a common field ground. Input impedance is 10K Ohms and input voltage can range from 5VDC to 32VDC. All inputs have LED status indicators. The input common field ground is galvanically isolated from the communications link. The 7I70 uses field power of 5VDC to 32VDC and sets its default ..
The 7I71 is a remote isolated 48 output card. The 48 outputs are 5VDC to 28VDC sourcing drivers (common + field power) with 300 mA maximum current capability. All outputs have LED status indicators. Outputs have per output short circuit protection, overvoltage clamps and per driver chip thermal shutdown. The 7I71's outputs are suitable for driving relays, contactors, soleno..
The 7I73 is a remote real time pendant or control panel interface. The 7I73 uses a high speed real time RS-422 link for host communications and can support update rates up to 10K updates per second so there is no detectable delay or roughness in the control panel or pendant interface. The 7I73 supports up to four 50KHz encoder inputs for MPGs, 8 digital inputs and 6 digital outputs and..
The 7I83 is remote isolated six channel +-10V analog output card intended for analog drive interfacing or other +-10V analog output applications. The analog outputs, drive enables and field power are galvanically isolated from the communications link. Analog outputs have 13 bit resolution and a 2.5 KHz bandwidth. In addition the six analog channels, the 7I83 has six isolated..
The 7i84 is a remote isolated 32 input and 16 output digital I/O card. The 16 outputs are 5VDC to 28VDC sourcing drivers with 300 mA maximum current capability. Outputs have per output short circuit protection, overvoltage clamps and per driver chip thermal shutdown. The 7i84s outputs are suitable for driving relays, contactors, solenoids, and other medium power inductive or resistiv..