MESA 7i43H FPGA based High Speed USB Anything I/O card

Products Menu
MESA 7i43H FPGA based High Speed USB Anything I/O card
Brand: Mesa Electronics
Product Code: 7i43H
Availability: Pre-Order
Price: 116.41€

3 or more -5%
5 or more -10%
10 or more -15%
Qty:  

The MESA 7I43H is a low cost, general purpose programmable I/O card that connects to the host computer via USB.  The 7I43H uses a 400K gate Xilinx FPGA for all logic, so it is truly an Anything I/O card.  The FPGA is downloadable from the USB, and also has the capability of local configuration storage in an on card EEPROM.  Efficient switching regulators are used for FPGA core and 3.3V power, allowing the 7I43H to be USB bus powered.  The 7I43H can also be powered by an external 5V source.  A FTDI FT2232H high speed USB interface chip is used for the USB interface allowing transfer rates up to 25 MBytes per second.  Drivers are available for Windows and Linux.  The drivers avaliable for the FT2232H make the software interface a simple buffered byte stream.  A 50 MHz oscillator provides the FPGA clock. This clock can be multiplied or divided in the FPGA for other clock rates.  The 7I43H has 48 I/O bits available on two 50 pin connectors. Both connectors use I/O module rack compatible pinouts.  All I/O bits are 5V tolerant, and have series and parallel termination options (DCI).  The I/O connectors are compatible with our 7 series daughter cards for isolated I/O, motion control and other applications.  Configurations are provided for simple GPIO, Smart Motion control (SoftDMC), host based motion control (HostMot2),and a waveform generator.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: