Your shopping cart is empty!
The 7C80 mounts in standard 107 mm DIN rail channels and is powered by 8 to 40V All field wiring is ..
The 7I29 is 2 channel H-bridge motor drivers for the 4I27 or FPGA based motor controller cards. The ..
The 7I72 is a remote isolated 48 output card. The 48 outputs are 5VDC to 28VDC sinking drivers..
The 7I89 is a eight channel encoder plus single channel
RS-422/RS-485 interface for Mesa's 25 pin ..
The 7IA0 is a 48 input, 24 output isolated I/O card. The 7IA0 provides 24 isolated 36VDC 2.5A ..
DIN Tray 107MM X 204MM for use with 7C80, 7IA0, 7M80.Provides a stable fixing to a DIN rail..
The MESA 6I24 is a low cost, general purpose, Xilinx XC6SLX16-2FTG256C FPGA based programmable I/O c..
The MESA 5I24 is a low cost, general purpose, FPGA based programmable I/O card for the PCI bus. The ..
The MESA 6I24-25 is a low cost, general purpose, Xilinx XC6SLX25-2FTG256C FPGA based programmable I/..
MESA 6I25 is a low cost, general purpose, FPGA based programmable I/O
card for the PCIE bus...
MESA 7C81 is FPGA motherboard host for a Raspberry Pi CPU. The 7C81
connects to the RPI's GPIO..
7I33TA is a 4 axis analog servo interfaces intended for operation with
Mesa's Anything I/O c..
The 7I34 is a 8 channel RS-422 interface for Mesa's Anything I/O
series of FPGA interface cards. T..
7I37-COM is a version of the 7I37 with a common input reference and a
common output power so..
The 7I37TA is
an 8 output, 16 input isolated I/O card. The 7I37TA provides 8 Isolated
7I42TA is a breakout card for Mesa's 50 pin I/O FPGA cards. It has 50
pin .1" output c..
The MESA 7I43 is a low cost, general purpose programmable I/O card
that connects to the host compu..
7I44 is a 8 channel RS-422 interface for Mesa's Anything I/O series of
FPGA interface cards...
The 7I46 is a six channel SPI breakout. It connects the 50 pin
Anything I/O cable to six 10 conduc..