Out of Stock
  • MESA 7i80DB-25 Ethernet Anything I/O card

The MESA 7I80DB is a low cost, general purpose, FPGA based programmable I/O card with 100 BaseT Ethernet host connection.  The 7I80DB that uses standard parallel port pinouts and connectors for compatibilty with most parallel port interfaced motion control / CNC breakout cards/ multi axis step motor drives, allowing a motion control performance boost while retaining a reliable real time Ethernet interface. Unlike the parallel port that the 7I80DB replaces, each I/O bit has individually programmable direction and function. The 7I80DB has a simplified UDP host data transfer system that allows operation in real time if required and compability with standard networks for non-real time applications. Dual FPGA configuration EEPROMs allow simple recovery from programming mistakes. The 7I80DB provides 68 I/O bits (17 per connector) All I/O bits are 5V tolerant and have pullup resistors. A power source option allows the 7I80DB to supply 5V power to breakout boards if desired. This 5V power is protected by a PTC. Firmware modules are provided for hardware step generation, quadrature encoder counting,  PWM generation, digital I/O,  Smart Serial remote I/O, BISS, SSI, SPI, UART interfaces and more.  Configurations are available that are compatible with common breakout cards and multi axis step motor drives like the Gecko G540. All motion control firmware is open source and easily modified to support new functions or different mixes of functions. 

There are currently six 7I80DB compatible breakout cards available from Mesa, the 7I74 through 7I78 and 7I85. The 7I76 is a step/dir oriented breakout with 5 axis of buffered step/dir outputs, one spindle encoder input, one isolated 0-10V analog spindle speed plus isolated direction and enable outputs, one RS-422 expansion port, 32 isolated 5-32V inputs and 16 isolated 5-32V 300 mA outputs. The 7I77 is a analog servo interface with 6 encoder inputs, 6 analog +-10V outputs, one RS-422 expansion port, 32 isolated 5-32V inputs, and 16 isolated 5-32V 300 mA outputs. The7I80DB supports four breakout cards so for example a 20 Axis step/dir configuration or 24 axis analog servo configuration is possible with a single 7I80DB and four Mesa breakout cards.


Write a review

Please login or register to review

MESA 7i80DB-25 Ethernet Anything I/O card

  • 216.32€


Related Products

MESA 7i77 Analog servo interface plus I/O daughtercard - sourcing output version

MESA 7i77 Analog servo interface plus I/O daughtercard - sourcing output version

The 7I77 is daughtercard/breakout board for use with MESA's 25 pin I/O FPGA cards like the 5I25...

254.72€

MESA 7i76 STEP DIR I/O daughtercard - sourcing output version

MESA 7i76 STEP DIR I/O daughtercard - sourcing output version

The 7I76 is daughtercard/breakout board for use with MESA's 25 pin I/O FPGA cards like the 5I25...

152.32€

MESA 7i78 Step & dir daughtercard

MESA 7i78 Step & dir daughtercard

The 7I78 daughtercard/breakout board for use with MESA's 25 pin I/O FPGA cards like the 5I25.&n..

88.32€

Network Cable RJ45 Cat5e U/UTP Yellow (50cm)

Network Cable RJ45 Cat5e U/UTP Yellow (50cm)

Cable length: 0.5 mStandard cable: Cat5eConnector 1: RJ-45Connector 2: RJ-45Connector gender: Male /..

1.40€

Network Cable RJ45 Cat5e U/UTP Blue (2m)

Network Cable RJ45 Cat5e U/UTP Blue (2m)

Cable length: 2 mStandard cable: Cat5eCable insulation: U / UTP (UTP)Connector 1: RJ-45Connector 2: ..

2.36€

Network Cable RJ45 Cat5e F/UTP Gray (30cm)

Network Cable RJ45 Cat5e F/UTP Gray (30cm)

- Cable length: 30 cm- Standard cable: Cat5e- Cable insulation: F / UTP (FTP)- Connector 1: RJ-45 Ma..

2.15€

Network Cable RJ45 Cat5e U/UTP Red (3m)

Network Cable RJ45 Cat5e U/UTP Red (3m)

Plug & Play Compatibility: YesRoHS Compliant: YesAWG wire size: 24Cable color: RedCable insulati..

2.60€

Network Cable RJ45 Cat5e U/UTP Green (1m)

Network Cable RJ45 Cat5e U/UTP Green (1m)

Cable length: 1 mStandard cable: Cat5eCable insulation: U / UTP (UTP)Connector 1: RJ-45Connector 2: ..

1.88€

7I72 Isolated remote power driver card sinking outputs

7I72 Isolated remote power driver card sinking outputs

The 7I72 is a remote isolated 48 output card.  The 48 outputs are 5VDC to 28VDC sinking drivers..

152.32€