• MESA 7i96S STEP DIR I/O

The 7I96S is a Ethernet connected motion control interface designed for interfacing  up to 5 Axis of step&dir step motor or servo motor drives. Step rates up to 10 MHz are supported. The 7I96S also has 11 isolated inputs plus 6 isolated outputs for general purpose I/O use. A high speed encoder interface is provided for spindle synchronized motion and an isolated analog spindle output allows spindle speed control . A RS-422/RS485 serial port  and a parallel port are provided for I/O expansion .


All step and direction outputs are buffered 5V signals that can drive 24 mA.  All outputs support differential mode to reduce susceptibility to noise.  The spindle encoder can be used with TTL or differential input.

11 isolated inputs provided for general control use including limit switch and control panel inputs. Inputs operate with 3V to 36V DC and can have a positive or negative common for sourcing or sinking input applications. Four 36V 2A isolated outputs and 2 high isolation 36V 100 mA outputs  allow sinking, sourcing  or combinations of both output types.

One  RS-422/RS-485 interface is provided for I/O expansion via a serial I/O daughtercard.  In addition to the on card I/O, A FPGA expansion connector compatible with Mesa's 25 pin daughtercards or standard parallel port breakout boards allow almost unlimited I/O options including additional quadrature or absolute encoder inputs, step/dir or PWM/dir outputs, and field I/O expansion to hundreds of I/O of points.  All field wiring is terminated in pluggable 3.5 mm screw terminal blocks.

Write a review

Please login or register to review

MESA 7i96S STEP DIR I/O

  • 170.00€


Related Products

MESA THCAD-300 High isolation A-D accessory

MESA THCAD-300 High isolation A-D accessory

The THCAD is a frequency to voltage converter type A-D designed for high noise environments like pla..

88.32€

Support plate for Mesa 7i96S

Support plate for Mesa 7i96S

Support plate for Mesa 7i96S cards. Includes screws and brass standoffs. Made in 2mm steel..

21.39€

DB25F-IDC26 cable adaptor Standard Profile

DB25F-IDC26 cable adaptor Standard Profile

DB25F to IDC26 flat cable.Expansion connector cable for 5I25, 6I25, 7I76E, 7I76ED, 7I92, 7I92M, 7I92..

8.91€

MESA THCAD-5 High isolation A-D accessory

MESA THCAD-5 High isolation A-D accessory

The THCAD is a frequency to voltage converter type A-D designed for high noise environments like pla..

88.32€

Network Cable RJ45 Cat5e U/UTP Yellow (50cm)

Network Cable RJ45 Cat5e U/UTP Yellow (50cm)

Cable length: 0.5 mStandard cable: Cat5eConnector 1: RJ-45Connector 2: RJ-45Connector gender: Male /..

1.40€

Network Cable RJ45 Cat5e U/UTP Blue (2m)

Network Cable RJ45 Cat5e U/UTP Blue (2m)

Cable length: 2 mStandard cable: Cat5eCable insulation: U / UTP (UTP)Connector 1: RJ-45Connector 2: ..

2.36€

Network Cable RJ45 Cat5e F/UTP Gray (30cm)

Network Cable RJ45 Cat5e F/UTP Gray (30cm)

- Cable length: 30 cm- Standard cable: Cat5e- Cable insulation: F / UTP (FTP)- Connector 1: RJ-45 Ma..

2.15€

Network Cable RJ45 Cat5e U/UTP Red (3m)

Network Cable RJ45 Cat5e U/UTP Red (3m)

Plug & Play Compatibility: YesRoHS Compliant: YesAWG wire size: 24Cable color: RedCable insulati..

2.60€

Network Cable RJ45 Cat5e U/UTP Green (1m)

Network Cable RJ45 Cat5e U/UTP Green (1m)

Cable length: 1 mStandard cable: Cat5eCable insulation: U / UTP (UTP)Connector 1: RJ-45Connector 2: ..

1.88€

DB25F-IDC26 cable adaptor Low Profile

DB25F-IDC26 cable adaptor Low Profile

DB25F to IDC26 flat cable.Expansion connector cable for 5I25, 6I25, 7I76E, 7I76ED, 7I92, 7I92M, 7I92..

8.91€

MESA 7i71 Isolated remote power driver card sourcing outputs

MESA 7i71 Isolated remote power driver card sourcing outputs

The 7I71 is a remote isolated 48 output card.  The 48 outputs are 5VDC to 28VDC sourcing driver..

148.50€

MESA THCAD2 High isolation A-D accessory

MESA THCAD2 High isolation A-D accessory

The THCAD2 is a frequency to voltage converter type A-D designed for high noise environments like pl..

90.00€

Tags: mesa, 7i96S