Your shopping cart is empty!
New version to replace 7i92M
7I92TH is a low cost, general purpose, FPGA based programmable I/O card
with 100 BaseT Ethernet host connection. The 7I92H uses standard
parallel port pinouts and connectors for compatibilty with most parallel
port interfaced motion control /
CNC breakout cards/ multi axis step motor drives, allowing a motion
control performance boost while retaining a reliable real time Ethernet
interface. Unlike the parallel port that the 7I92H replaces, each I/O
bit has individually programmable direction and function. The 7I92H has a
simplified UDP host data transfer system that allows operation in real
time if required and compability with standard networks for non-real
time applications. The 7I92H provides 34 I/O bits (17 per connector) All
I/O bits are 5V tolerant and have pullup resistors. A power source
option allows the 7I92H to supply 5V power to breakout boards if
desired. Firmware modules are provided for hardware step generation,
quadrature encoder counting, PWM generation, digital I/O, Smart Serial
remote I/O, BISS, SSI, SPI, UART interfaces and more. Configurations
are available that are compatible with common breakout cards and multi
axis step motor drives like the Gecko G540 and Leadshine MX3660. All
motion control firmware is open source and easily modified to support
new functions or different mixes of functions. I/O connectors are both
latching 26 pin headers.
are currently six 7I92H compatible breakout cards available from Mesa,
the 7I74 through 7I78 and 7I85. The 7I76 is a step/dir oriented breakout
with 5 axis of buffered step/dir outputs, one spindle encoder input, one
isolated 0-10V analog spindle speed plus isolated direction and enable
outputs, one RS-422 expansion port, 32 isolated 5-32V inputs and 16
isolated 5-32V 300 mA outputs. The 7I77 is a analog servo interface with
6 encoder inputs, 6 analog +-10V outputs, one RS-422 expansion port, 32
isolated 5-32V inputs, and 16 isolated 5-32V 300 mA outputs. The 7I92H
supports two breakout cards so for example a 10 Axis step/dir
configuration or 12 axis analog servo configuration is possible with a
single 7I92H and two Mesa breakout cards.
0 reviews / Write a review
7I77 is daughtercard/breakout board for use with MESA's 25 pin I/O FPGA
cards like the 5I25...
7I76 is daughtercard/breakout board for use with MESA's 25 pin I/O FPGA
cards like the 5I25...
The 7I78 daughtercard/breakout board for use with MESA's 25 pin I/O FPGA cards like the 5I25.&n..
DB25F to IDC26 flat cable.Expansion connector cable for 5I25, 6I25, 7I76E, 7I76ED, 7I92, 7I92M, 7I92..
Cable length: 0.5 mStandard cable: Cat5eConnector 1: RJ-45Connector 2: RJ-45Connector gender: Male /..
Cable length: 2 mStandard cable: Cat5eCable insulation: U / UTP (UTP)Connector 1: RJ-45Connector 2: ..
- Cable length: 50 cm- Standard cable: Cat5e- Cable insulation: F / UTP (FTP)- Connector 1: RJ-45 Ma..
Plug & Play Compatibility: YesRoHS Compliant: YesAWG wire size: 24Cable color: RedCable insulati..
Cable length: 1 mStandard cable: Cat5eCable insulation: U / UTP (UTP)Connector 1: RJ-45Connector 2: ..
The 7I72 is a remote isolated 48 output card. The 48 outputs are 5VDC to 28VDC sinking drivers..