Your shopping cart is empty!
7I76 is daughtercard/breakout board for use with MESA's 25 pin I/O FPGA
cards like the 5I25. The 7I76 is designed for interfacing up to 5 Axis
of step & dir step motor or servo motor drives and also provides a
spindle encoder interface, isolated analog spindle speed control and 48
isolated I/O points for general purpose field I/O use. All step and
direction outputs are buffered 5V signals that can drive 24 mA. All
outputs support differential mode to reduce susceptibility to noise. An
isolated analog spindle voltage with direction and enable outputs is
provided for spindle control as is a single spindle encoder channel with
TTL or differential inputs. 48 points of isolated field I/O are
provided for general control use including limit switch and control
panel inputs, coolant enable and tool changer control outputs. Isolated
I/O includes 32 sinking inputs and 16 sourcing outputs. Inputs can
sense 5V to 32V signals and the outputs can switch 5V through 28V
signals. Maximum output load is 300 mA. Outputs are short circuit protected. In
addition to the being able to read digital on/off status of each input,
four input pin voltages are readable with 8 bit resolution, and two MPG
encoder inputs are provided as an option on four field inputs. Field I/O is powered by an isolated 10-32V field power source.
One RS-422 interface is provided for I/O expansion via a serial I/O
daughtercard. All field wiring is terminated in pluggable 3.5 mm screw
0 reviews / Write a review
The MESA 7I92M is a low cost, general purpose, FPGA based programmable I/O card with 100 BaseT Ether..
The THCAD is a frequency to voltage converter type A-D designed for high noise environments like pla..
7I92H is a low cost, general purpose, FPGA based programmable I/O card
with 100 BaseT E..
MESA 6I25 is a low cost, general purpose, FPGA based programmable I/O
card for the PCIE bus...
Support plate for Mesa 7i76 cards, with 8 fixing points. Includes screws and brass standoffs...
MESA 7I80DB is a low cost, general purpose, FPGA based programmable I/O
card with 100 BaseT ..
The 7i84 is a remote isolated 32 input and 16 output digital I/O
card. The 16 outputs are 5VDC to ..
Multiples of one meter (1m). Price per meter.number of conductors: 25pitch: 1/2" (1.27mm)colour: gre..
DB25M to DB25M 1:1 parallel port cable 1.8m to 2.0mSmall variations in length can occur between 1.8m..
DB25M to DB25M 1:1 parallel port cable 3m..
Cable length: 2 mStandard cable: Cat5eCable insulation: U / UTP (UTP)Connector 1: RJ-45Connector 2: ..
- Cable length: 5 m- Standard cable: Cat5e- Cable insulation: F / UTP (FTP)- Connector 1: RJ-45 Male..
Cable length: 1 mStandard cable: Cat5eCable insulation: U / UTP (UTP)Connector 1: RJ-45Connector 2: ..