Your shopping cart is empty!
The 7C80 mounts in standard 107 mm DIN rail channels and is powered by 8 to 40V All field wiring is terminated in
pluggable 3.5 mm screw terminal blocks. A RS-422/RS-485 interface is provided for
I/O expansion via a serial I/O daughtercards or general RS-422/RS-485 use. In addition to the
on card I/O, A FPGA expansion connector compatible with Mesa's 25 pin
daughtercards or standard parallel port breakout boards allow almost
unlimited I/O options including additional quadrature or absolute
encoder inputs, step/dir or PWM/dir outputs, and field I/O expansion to
hundreds of I/O points. Eight
36V 2A isolated outputs allow sinking,
sourcing, or combinations of both. Spindle control includes a high speed differential or
single-ended encoder input for spindle feedback and an isolated
analog spindle interface with real time speed and direction
control. 24 isolated inputs are provided for general control use
including limit switch, control panel inputs, and up to 4 MPGs. Inputs operate with 4V
to 36V DC and have 2 independent positive or negative commons for sourcing or
sinking input applications. . The 7C80 provides 5V power for the RPI via a built in switching
regulator. The 7C80 has 6 channels of differential Step/dir outputs
with step rates up to 10 MHz. The
MESA 7C80 is motion oriented FPGA motherboard host for a Raspberry Pi CPU. The 7C80
connects to the GPIO interface and uses SPI for FPGA communication.
0 reviews / Write a review
DIN Tray 107MM X 204MM for use with 7C80, 7IA0, 7M80.Provides a stable fixing to a DIN rail..
Flat cable male-male 40 pins, rainbow color 20cm.Normally used to connect the Raspberry PI with the ..
The raspberry with the most comprehensive cost performance to be used on motion control applications..