• MESA THCAD2 High isolation A-D accessory

The THCAD2 is a frequency to voltage converter type A-D designed for high noise environments like plasma voltage monitoring for torch height controls.  The THCAD2 has 2 settable input ranges, 5V full scale and 10V full scale to accommodate different plasma source dividers.  When used for direct plasma voltage monitoring, the THCAD2 requires an external high voltage resistor or divider. The THCAD2 has a frequency output range of approximately 100 KHz to 1 MHz. This can be counted directly by our FPGA cards for conversion to voltage value.  The frequency output can optionally be divided by 32, 64 or 128 if the output must be counted in software.  Frequency and reference frequency outputs are available. Both outputs are differential for high noise immunity.  The A-D has galvanically isolated inputs (2500V common mode isolation).  The THCAD2 can withstand a 500V input overload indefinitely.   Being a frequency to voltage type A-D, resolution is sample rate dependent and approximately 10 bits at a 1 KHz sample rate and 12 bits at a 250 Hz sample rate.  Pluggable screw terminal blocks are provided for all connections. The THCAD2 has built in DIN rail mounting hardware.

Write a review

Please login or register to review

MESA THCAD2 High isolation A-D accessory

  • 98.32€


Related Products

MESA 7i77 Analog servo interface plus I/O daughtercard - sourcing output version

MESA 7i77 Analog servo interface plus I/O daughtercard - sourcing output version

The 7I77 is daughtercard/breakout board for use with MESA's 25 pin I/O FPGA cards like the 5I25...

254.72€

MESA 7i95 Ethernet interfaced Step/dir + encoder + I/O

MESA 7i95 Ethernet interfaced Step/dir + encoder + I/O

The 7I95 is a Ethernet connected motion control interface designed for controlling up to 6 Axis of s..

318.72€

MESA 7i76 STEP DIR I/O daughtercard

MESA 7i76 STEP DIR I/O daughtercard

The 7I76 is daughtercard/breakout board for use with MESA's 25 pin I/O FPGA cards like the 5I25...

152.32€

MESA 7i97 Ethernet interfaced Analog servo plus I/O

MESA 7i97 Ethernet interfaced Analog servo plus I/O

The 7I97 is a Ethernet connected motion control interface designed for interfacing  up to 6 Axi..

357.12€

MESA 7i72 STEP DIR I/O daughtercard

MESA 7i72 STEP DIR I/O daughtercard

The 7I72 is a remote isolated 48 output card.  The 48 outputs are 5VDC to 28VDC sinking drivers..

152.32€

MESA 7i96S STEP DIR I/O

MESA 7i96S STEP DIR I/O

The 7I96S is a Ethernet connected motion control interface designed for interfacing  up to 5 Ax..

188.97€

MESA 7i76E STEP DIR I/O + support plate

MESA 7i76E STEP DIR I/O + support plate

PRE ORDER FINISHED, NO MORE PREORDERS ARE ACCEPTED UNTIL WE KNOW HOW MANY UNITS WILL BE RECEIVEDCurr..

315.65€

Tags: Mesa, THCAD2